Job Search Results for Industrial Engineer

Electrical Engineer

Our large Engineering client is seeking an electrical engineer to sit near one of the following offices: Hunt Valley, New Cumberland PA, Dover DE, OR Fairfax VA. This position can work up to 100%... More remote but needs to be near one of their offices in case they need to do site visits. The ideal candidate will have at least 7 years working for an engineering consulting firm doing full cycle Electrical engineering design work. They will be required to run projects from beginning to end from the time the project is awarded the electrical engineer will do all the design, specs, and oversee the construction and interface with the customers (counties and public agencies). In addition to supporting water wastewater projects, candidates will be involved in commercial, multi family, and industrial. Other requirements of the role are performing field investigations to determine existing conditions and design all aspects of electrical engineering projects, including (but not limited to) those in the industrial and water/wastewater sector, such as pump stations, wet wells, and water/wastewater treatment plants. This individual will Develop bid and permit drawings and specifications and assist in fee estimating and construction cost estimating. They will draft technical specifications, interpret and apply all applicable federal, state and/or local codes as well as respond to contractor RFIs and review construction submittals.Less

Software Engineer III

Max BR: 95/hour Very low likelihood of being extended Open to remote candidates any US Apply the principles of computer science and mathematical analysis to the design development testing and... More evaluation of the software and systems that make computers work. Designs develops and tests operating systems-level software compilers and network distribution software for medical industrial military communications aerospace business scientific and general computing applications. Education/Experience o Bachelors degree in computer science software engineering or relevant field required o 5-7 years experience required Responsibility level o Exercises independent judgment with direction from supervisor Skills o Verbal and written communication skills problem solving skills customer service and interpersonal skills Required o Ability to work independently and manage one's time Required o Basic mentoring skills necessary to provide support and constructive performance feedback Required o Knowledge of the full software development lifecycle: from business/systems analysis through requirements gathering and functional specification authoring to development testing and delivery Required o Ability to troubleshoot issues and make system changes as needed to resolve issue based on end user feedback and own investigation o Knowledge of computer development software as it relates to systems such as SQL VisualBasic etc Required o Familiarity with github visual studio JIRA preferred. Major Job Duties and Responsibilities: o Debug reverse engineer and modify VB.NET code and some DB records. Integrate and understand methods from another internal API. o Work as part of a project team to coordinate code development and determine project scope and limitations o Review project requests describing end user needs to estimate time and cost required to accomplish project ADDITIONAL INFORMATION FROM MANAGER: 1. To get started can you give me a quick overview of your team and what you do? Develop and maintain an internal web application that generates customer-facing paperwork for our sales force. This position specifically will be working to enhance VB code related to our insurance business. 2. The person who will be successful in this role will be somebody who? Will tread carefully not creating new problems when fixing the current problems. There are dependencies on other systems which provide data in specific formats. There are dependencies on other products which use the same logic. The ideal candidate is someone who is concerned not just about fixing this problem but also about not creating other problems elsewhere. 3. What would you say are the TOP 3 must-have skills youre looking for? Measurable skills technologies etc. a. Visual Basic our tools code is written in VB so any foundational corrections we make will need to be made in VB. Contractor will need to step through the code and debug. b. SOAP/JSON the reading and debugging of responses we receive to external WS calls. c. SQL Server we use an SQL Server database for what isnt hardcoded. We maybe wont need to make changes but the contractor will need to understand the data structure for debugging purposes. 4. How many years of experience are you looking for? As you start to go through resumes what would stand out to you as the BEST candidate versus an AVERAGE candidate? 6 years 5. Does your team work standard core hours or does that vary? Two people work US East Coast hours and one works UK hours. 6. Do you need someone with a particular degree or certification? Experience/competence is more important than a degree or cert. 7. What are some of the performance indicators youll be looking for once this person ramps up? Meeting deadlines quality of work etc. We have weekly meetings with business stakeholders to check progress and gather feedback. We have a 3-week release cycle to get updates through testing and into production. Quality of work has to be production-friendly. What does your interview process look like? Talk about the tool and what we need. Talk about their skills and how they fit. Answer questions as they come up. Try to be casual and personable.Less

REMOTE Network Engineer

An employer is looking for a REMOTE Network Operations Engineer to join their team. This person will be expected to drive teamwork and collaboration across the organization. They will be joining an... More agile, growing company, and may be asked to assist with other projects for the company in addition to their regular responsibilities. This person will be the Tier 2/Tier 3 escalation point for anything the Service Desk cannot manage. They will support day-to-day operations, including, but not limited to, responding to operational network issues, deploying new infrastructure, and continually improving network reliability and security. Additionally, they will assist in architecting, deploying, administering, and monitoring network infrastructure; Firewalls, Routers and Modems, Switched, Intrusion Detection and Prevention Systems (IDS and IPS), and Virtual Networking (ESXi/VMWare, Azure preferred). They will support, plan, and implement security patching for network infrastructure; design, test, implement, and maintain automation and orchestration toolsets for network infrastructure management and monitoring. This person will assist in team building, defining documenting processes, and procedures. They should be a team player, flexible, and willing to participate in an on-call rotation.Less

Sr Electrical Controls Design Engineer

What You'll Be Doing: Insight Global is looking for a Controls Design Engineer (electrical focused) to specialize in completing cradle to grave system design and integration work for project... More completion with one of our clients in Indianapolis, IN. This is a direct-hire, permanent role and we are looking for an engineer with 5+ years of experience designing, developing, and supervising most aspects of electrical controls systems, equipment, and machinery. We are looking for someone who can think on their feet and open to learning new tools and technologies -- this person will rarely ever design the same system over & over; in fact, they've never really made the same machine twice. They're also looking for someone who is a natural problem solver since you'll be figuring out design tasks with minimal help, ensuring project schedules are running accordingly, meeting with the customer, and more. Their designs are electrical panel schematics (wiring diagrams and panel layouts), and this person should be able to specify the components needed for the system and develop the schematics and panel layout from scratch. It's also important to note that the team runs projects "cradle to grave" meaning that a lot of times the same engineer does the electrical design, software design and startup of the equipment. In addition to electrical control panel design, this person will participate in specking, component measurements, instrumentation, etc. When you are traveling, you're working on projects for the company's clients in the manufacturing arena, including medical device companies, automotive companies, food & beverage companies, and more. Candidates must have experience with PLC programming, familiar with HMI programming, experience using AutoCAD-like programs and must understand electrical wiring and controls (this is not a mechanical-focused Controls Engineering role). Up to 30% of your time in this role will be spent on domestic travel, so it's required you have a valid driver's license, valid passport or willing to get one (if you don't have a passport but are willing to get one, the company will help you with that), and ability to travel to customer facilities when required. Most domestic travel is within a 2--3-hour radius of the office, and on average Engineers travel about 18% of the year. Please let us know if this is a job you'd be interested in -- we'd love to talk with you more about it!Target Travel Breakdown: All travel expenses are paid for when working on domestic projects. Ex: hotel, mileage, rental car fees, etc. 80-90% of project work is completed locally. - In Office/Remote at home: 70%- Local travel: 20%- Overnight: 10%Target Role Breakdown:- Technical: 100%- Management: 0%- Leadership: 0%Breakdown of Focus Areas: *Up to 40% of time spent in Client/People Management. *Up to 40% of time spent as a Solutions Architect (building a framework to meet customer needs and applies appropriate industry standards). *20% of time spent as a developer (builds and programs actual system components and follows applicable standards, as directed by Project Managers).Environment: Manufacturing Electronic Controls Design Engineering - Industrial Automation & Industrial ControlsLess

Mid-Sr Level Structural Engineer (REMOTE)

A client located in in Lenexa, Kansas is seeking a Mid-Level Structural Engineer to add to its growing team. The Structural Engineer will be in a production-oriented role which consists of technical... More project drawings, engineering calculations, and design analysis.Less

Remote Electrical Engineer

Responsibilities *This position will be responsible for performing the engineering and consulting services *Main responsibilities include working with the team to create electrical,... More instrumentation and controls components of Generating stations and its ancillary equipment. *Projects range in size and complexity from small utility generating station upgrades to large turnkey power plant construction. *Position may include full or partial responsibility for the following Electrical tasksLess